LED Autolamps 12RCM-2 Stop/Tail Lamp Clear Coloured Lens 12/24V Low Profile 3M Tape Fitting Twin Blister
ECE/CTA Approved 12/24V Stop/Tail Lamp Twin Pack Clear Lens, 8mm Ultra-Slim, IP67
Product Overview
The LED Autolamps 12RCM-2 is a 12/24V stop/tail lamp with a clear lens, supplied as a twin blister pack for a complete left and right rear installation. Measuring 131mm x 30mm x 8mm, the ultra-slim 8mm profile mounts via 3M adhesive tape or screws suited to trailers, caravans, trucks, and commercial vehicles where a discreet, low-profile stop/tail solution is required.
ECE and CTA approved, IP67 rated, and backed by a 5-year warranty. The clear lens presents a clean appearance when inactive, with red stop/tail output activating when the lamp is energised. Pairs naturally with the 12ACM-2 indicator lamp for a matched clear lens rear lighting set.
Features & Benefits
- Twin blister pack — two lamps supplied for a complete left and right rear stop/tail installation in a single purchase
- Clear lens — clean, colourless appearance when inactive; red stop/tail output activates when the lamp is energised
- Ultra-slim 8mm profile — low-profile design suits tight installation spaces on trailer, caravan, and truck body panels
- 3M tape and screw fitting — dual mounting options for adhesive or screw-fixed installation on a wide range of surfaces
- ECE and CTA approved — meets international and Australian road approval standards for legal on-road use as a stop/tail lamp
- IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
- 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification
- 5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
| Specification | Detail |
|---|---|
| SKU | 12RCM-2 |
| Pack Contents | 2 lamps |
| Lamp Type | Stop / Tail |
| Lens Colour | Clear |
| Voltage Range | 12V – 24V |
| Dimensions | 131mm x 30mm x 8mm |
| Mounting | 3M tape / screw |
| Protection Rating | IP67 |
| Approval | ECE, CTA |
| Packaging | Blister pack |
| Warranty | 5 years |
Compatible With / Goes Well With
- Trailers, caravans, trucks, and commercial vehicles requiring low-profile stop/tail lamps
- 12V light vehicles and 24V heavy transport applications
- Installations requiring flexible mounting orientation or adhesive fitting
- LED Autolamps 12ACM-2 clear lens indicator lamp (matching clear lens and form factor)
- LED Autolamps 12ARM-2 stop/tail/indicator lamp pair (same 12 series)
- LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
What is included in the 12RCM-2 twin blister pack?
The pack contains two lamps, providing a complete left and right rear stop/tail installation in a single purchase.
What does the clear lens look like when inactive?
When not energised, the lens appears clear and colourless. The red stop/tail output is produced by the LEDs and only becomes visible when the lamp is activated.
What mounting options does the 12RCM-2 support?
It can be mounted using 3M adhesive tape or screws — adaptable to a wide range of vehicle panel layouts and surfaces.
What compliance approvals does the 12RCM-2 carry?
The 12RCM-2 is approved under ECE and CTA standards, meeting international and Australian road approval requirements for legal on-road use as a stop/tail lamp.
What warranty does the 12RCM-2 carry?
The 12RCM-2 is backed by a 5-year warranty from LED Autolamps.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
ECE/CTA Approved 12/24V Stop/Tail Lamp Twin Pack Clear Lens, 8mm Ultra-Slim, IP67
Product Overview
The LED Autolamps 12RCM-2 is a 12/24V stop/tail lamp with a clear lens, supplied as a twin blister pack for a complete left and right rear installation. Measuring 131mm x 30mm x 8mm, the ultra-slim 8mm profile mounts via 3M adhesive tape or screws suited to trailers, caravans, trucks, and commercial vehicles where a discreet, low-profile stop/tail solution is required.
ECE and CTA approved, IP67 rated, and backed by a 5-year warranty. The clear lens presents a clean appearance when inactive, with red stop/tail output activating when the lamp is energised. Pairs naturally with the 12ACM-2 indicator lamp for a matched clear lens rear lighting set.
Features & Benefits
- Twin blister pack — two lamps supplied for a complete left and right rear stop/tail installation in a single purchase
- Clear lens — clean, colourless appearance when inactive; red stop/tail output activates when the lamp is energised
- Ultra-slim 8mm profile — low-profile design suits tight installation spaces on trailer, caravan, and truck body panels
- 3M tape and screw fitting — dual mounting options for adhesive or screw-fixed installation on a wide range of surfaces
- ECE and CTA approved — meets international and Australian road approval standards for legal on-road use as a stop/tail lamp
- IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
- 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification
- 5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
| Specification | Detail |
|---|---|
| SKU | 12RCM-2 |
| Pack Contents | 2 lamps |
| Lamp Type | Stop / Tail |
| Lens Colour | Clear |
| Voltage Range | 12V – 24V |
| Dimensions | 131mm x 30mm x 8mm |
| Mounting | 3M tape / screw |
| Protection Rating | IP67 |
| Approval | ECE, CTA |
| Packaging | Blister pack |
| Warranty | 5 years |
Compatible With / Goes Well With
- Trailers, caravans, trucks, and commercial vehicles requiring low-profile stop/tail lamps
- 12V light vehicles and 24V heavy transport applications
- Installations requiring flexible mounting orientation or adhesive fitting
- LED Autolamps 12ACM-2 clear lens indicator lamp (matching clear lens and form factor)
- LED Autolamps 12ARM-2 stop/tail/indicator lamp pair (same 12 series)
- LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
What is included in the 12RCM-2 twin blister pack?
The pack contains two lamps, providing a complete left and right rear stop/tail installation in a single purchase.
What does the clear lens look like when inactive?
When not energised, the lens appears clear and colourless. The red stop/tail output is produced by the LEDs and only becomes visible when the lamp is activated.
What mounting options does the 12RCM-2 support?
It can be mounted using 3M adhesive tape or screws — adaptable to a wide range of vehicle panel layouts and surfaces.
What compliance approvals does the 12RCM-2 carry?
The 12RCM-2 is approved under ECE and CTA standards, meeting international and Australian road approval requirements for legal on-road use as a stop/tail lamp.
What warranty does the 12RCM-2 carry?
The 12RCM-2 is backed by a 5-year warranty from LED Autolamps.
