
LED Autolamps 151BAR 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M
ECE Approved 12V Stop/Tail/Indicator Lamp with Built-In Reflector IP67, 5-Year Warranty
Product Overview
The LED Autolamps 151BAR is a 12V stop, tail, and indicator lamp with built-in reflector, supplied as a single lamp in the same 150mm x 80mm x 22mm low-profile form factor as the 151BAR2. It delivers three rear lighting functions plus passive reflector compliance in a single surface-mount unit an ECE-approved, cost-effective trailer lamp backed by a 5-year warranty.
Rated IP67 and designed for 12V trailer and vehicle electrical systems.
Features & Benefits
- Stop, tail, and indicator in one lamp — three functions plus built-in reflex reflector in a single compact unit
- Built-in reflector — integrated passive reflective element for additional rear visibility and compliance
- Low-profile 22mm depth — slim form factor sits close to the panel surface for a clean finish on trailer bodies
- ECE road approved — meets international road approval standards for legal on-road use across stop, tail, and indicator functions
- IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
- 12V only — designed for 12V trailer and vehicle electrical systems
- 5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
| Specification | Detail |
|---|---|
| SKU | 151BAR |
| Lamp Type | Stop / Tail / Indicator / Reflector |
| Voltage | 12V |
| Dimensions | 150mm x 80mm x 22mm |
| Mounting | Surface mount |
| Protection Rating | IP67 |
| Compliance | ECE |
| Warranty | 5 years |
| Weight | 0.2 kg |
Compatible With / Goes Well With
- Trailers and light commercial vehicles requiring a 12V rear combination lamp
- Trailer builds requiring ECE-approved stop/tail/indicator lighting
- LED Autolamps 151BAR2 (same lamp supplied as a 2-pack)
- LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
Is the 151BAR approved for road use in Australia?
Yes. The 151BAR is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia across stop, tail, and indicator functions.
What is the difference between the 151BAR and the 151BAR2?
The 151BAR is a single lamp, while the 151BAR2 is the same lamp supplied as a 2-pack for a complete left and right installation. The 151BAR also carries a 5-year warranty; confirm whether the 151BAR2 carries the same warranty with LED Autolamps.
What is the built-in reflector?
The reflector is a passive element integrated into the lamp housing, adding a compliant reflective surface for additional rear visibility without requiring a separate reflector unit.
What is the IP rating on the 151BAR?
The 151BAR is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting.
Is the 151BAR compatible with 24V systems?
No. The 151BAR is a 12V-only lamp and is not rated for 24V applications.
Weight
0.2 kg
Original: $36.02
-65%$36.02
$12.61Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
ECE Approved 12V Stop/Tail/Indicator Lamp with Built-In Reflector IP67, 5-Year Warranty
Product Overview
The LED Autolamps 151BAR is a 12V stop, tail, and indicator lamp with built-in reflector, supplied as a single lamp in the same 150mm x 80mm x 22mm low-profile form factor as the 151BAR2. It delivers three rear lighting functions plus passive reflector compliance in a single surface-mount unit an ECE-approved, cost-effective trailer lamp backed by a 5-year warranty.
Rated IP67 and designed for 12V trailer and vehicle electrical systems.
Features & Benefits
- Stop, tail, and indicator in one lamp — three functions plus built-in reflex reflector in a single compact unit
- Built-in reflector — integrated passive reflective element for additional rear visibility and compliance
- Low-profile 22mm depth — slim form factor sits close to the panel surface for a clean finish on trailer bodies
- ECE road approved — meets international road approval standards for legal on-road use across stop, tail, and indicator functions
- IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
- 12V only — designed for 12V trailer and vehicle electrical systems
- 5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
| Specification | Detail |
|---|---|
| SKU | 151BAR |
| Lamp Type | Stop / Tail / Indicator / Reflector |
| Voltage | 12V |
| Dimensions | 150mm x 80mm x 22mm |
| Mounting | Surface mount |
| Protection Rating | IP67 |
| Compliance | ECE |
| Warranty | 5 years |
| Weight | 0.2 kg |
Compatible With / Goes Well With
- Trailers and light commercial vehicles requiring a 12V rear combination lamp
- Trailer builds requiring ECE-approved stop/tail/indicator lighting
- LED Autolamps 151BAR2 (same lamp supplied as a 2-pack)
- LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
Is the 151BAR approved for road use in Australia?
Yes. The 151BAR is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia across stop, tail, and indicator functions.
What is the difference between the 151BAR and the 151BAR2?
The 151BAR is a single lamp, while the 151BAR2 is the same lamp supplied as a 2-pack for a complete left and right installation. The 151BAR also carries a 5-year warranty; confirm whether the 151BAR2 carries the same warranty with LED Autolamps.
What is the built-in reflector?
The reflector is a passive element integrated into the lamp housing, adding a compliant reflective surface for additional rear visibility without requiring a separate reflector unit.
What is the IP rating on the 151BAR?
The 151BAR is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting.
Is the 151BAR compatible with 24V systems?
No. The 151BAR is a 12V-only lamp and is not rated for 24V applications.
Weight
0.2 kg












