LED Autolamps 25R12 12V Slimline LED Stop/Tail Lamp With Red Lens
12V Slimline Recessed Stop/Tail Lamp Red Lens, 3mm Depth, ECE Approved, IP67.
Product Overview
The LED Autolamps 25R12 is a 12V stop/tail lamp from the 25 Series the red lens version of the ultra-slim recessed strip lamp range. At just 3mm deep and 130mm x 25mm, the 25R12 is one of the slimmest stop/tail lamps available, designed for flush recessed mounting where depth clearance is critical. Mount onto a flat surface horizontally, run wires through the back, push the lamp into a 106mm x 19mm cutout, and fix with screws supplied at both ends.
ECE approved (unlike the reverse variant 25W12 which is ADR approved only), IP67 rated, and 12V only. The red lens delivers stop and tail output in a clean, low-profile recessed format suited to trailers, caravans, and commercial vehicles. Backed by LED Autolamps' 5-year warranty.
Key Specifications
- Function: Stop and tail
- Lens: Red
- Dimensions: 130mm x 25mm x 3mm
- Cutout required: 106mm x 19mm
- Mount type: Recessed push into cutout, screw fix at both ends
- IP rating: IP67
- Input voltage: 12V only
- Compliance: ECE approved
- Warranty: 5 years
- Brand: LED Autolamps
- SKU: 25R12
Features & Benefits
- Ultra-slim 3mm depth: At just 3mm, the 25R12 is one of the thinnest stop/tail lamps available ideal for flush installations with minimal depth clearance behind the panel
- Recessed mount:Â Pushes into 106mm x 19mm cutout and fixes with screws at both ends for a flush, clean appearance
- Red lens:Â Clear red lens for standard stop and tail function output
- ECE approved:Â Certified for stop and tail use on Australian and international road vehicles and trailers
- IP67 waterproof:Â Completely sealed against dust and temporary water immersion
- 12V only:Â Direct 12V compatibility for trailers, caravans, and light commercial vehicles
- 5-year warranty:Â Backed by LED Autolamps' 5-year warranty
Technical Specs
| Specification | Detail |
|---|---|
| SKU | 25R12 |
| Brand | LED Autolamps |
| Series | 25 Series |
| Function | Stop and Tail |
| Lens | Red |
| Dimensions | 130mm x 25mm x 3mm |
| Cutout Required | 106mm x 19mm |
| Mount Type | Recessed push into cutout, screw fix at both ends |
| IP Rating | IP67 |
| Input Voltage | 12V only |
| Compliance | ECE approved |
| Warranty | 5 Years |
Compatible With
Suits 12V trailers, caravans, and vehicles requiring an ultra-slim recessed stop/tail lamp:
- Caravans and motorhomes with limited depth clearance at the rear panel
- Trailer rear panels where a flush, low-profile stop/tail lamp is required
- Applications where the 25 Series form factor is used across multiple functions
Frequently Asked Questions
What cutout size does this lamp require?
The 25R12 fits into a 106mm x 19mm cutout in the mounting surface.
Is this lamp ECE approved?
Yes the 25R12 stop/tail function is ECE approved. Note that the 25 Series reverse lamp (25W12) is not ECE approved for the reverse function only ADR approved.
What is the depth of this lamp?
Just 3mm one of the slimmest stop/tail lamps available, making it ideal for flush installations with minimal rear panel depth clearance.
Is there a matching reverse lamp in this series?
Yes the LED Autolamps 25W12 is the matching reverse lamp from the 25 Series (previously listed). Note the 25W12 is ADR approved but not ECE approved for the reverse function.
What is the return policy for this product?
Return eligibility is subject to the retailer's policy. Always confirm 12V compatibility and cutout dimensions before purchasing. Contact the seller if you're unsure.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
12V Slimline Recessed Stop/Tail Lamp Red Lens, 3mm Depth, ECE Approved, IP67.
Product Overview
The LED Autolamps 25R12 is a 12V stop/tail lamp from the 25 Series the red lens version of the ultra-slim recessed strip lamp range. At just 3mm deep and 130mm x 25mm, the 25R12 is one of the slimmest stop/tail lamps available, designed for flush recessed mounting where depth clearance is critical. Mount onto a flat surface horizontally, run wires through the back, push the lamp into a 106mm x 19mm cutout, and fix with screws supplied at both ends.
ECE approved (unlike the reverse variant 25W12 which is ADR approved only), IP67 rated, and 12V only. The red lens delivers stop and tail output in a clean, low-profile recessed format suited to trailers, caravans, and commercial vehicles. Backed by LED Autolamps' 5-year warranty.
Key Specifications
- Function: Stop and tail
- Lens: Red
- Dimensions: 130mm x 25mm x 3mm
- Cutout required: 106mm x 19mm
- Mount type: Recessed push into cutout, screw fix at both ends
- IP rating: IP67
- Input voltage: 12V only
- Compliance: ECE approved
- Warranty: 5 years
- Brand: LED Autolamps
- SKU: 25R12
Features & Benefits
- Ultra-slim 3mm depth: At just 3mm, the 25R12 is one of the thinnest stop/tail lamps available ideal for flush installations with minimal depth clearance behind the panel
- Recessed mount:Â Pushes into 106mm x 19mm cutout and fixes with screws at both ends for a flush, clean appearance
- Red lens:Â Clear red lens for standard stop and tail function output
- ECE approved:Â Certified for stop and tail use on Australian and international road vehicles and trailers
- IP67 waterproof:Â Completely sealed against dust and temporary water immersion
- 12V only:Â Direct 12V compatibility for trailers, caravans, and light commercial vehicles
- 5-year warranty:Â Backed by LED Autolamps' 5-year warranty
Technical Specs
| Specification | Detail |
|---|---|
| SKU | 25R12 |
| Brand | LED Autolamps |
| Series | 25 Series |
| Function | Stop and Tail |
| Lens | Red |
| Dimensions | 130mm x 25mm x 3mm |
| Cutout Required | 106mm x 19mm |
| Mount Type | Recessed push into cutout, screw fix at both ends |
| IP Rating | IP67 |
| Input Voltage | 12V only |
| Compliance | ECE approved |
| Warranty | 5 Years |
Compatible With
Suits 12V trailers, caravans, and vehicles requiring an ultra-slim recessed stop/tail lamp:
- Caravans and motorhomes with limited depth clearance at the rear panel
- Trailer rear panels where a flush, low-profile stop/tail lamp is required
- Applications where the 25 Series form factor is used across multiple functions
Frequently Asked Questions
What cutout size does this lamp require?
The 25R12 fits into a 106mm x 19mm cutout in the mounting surface.
Is this lamp ECE approved?
Yes the 25R12 stop/tail function is ECE approved. Note that the 25 Series reverse lamp (25W12) is not ECE approved for the reverse function only ADR approved.
What is the depth of this lamp?
Just 3mm one of the slimmest stop/tail lamps available, making it ideal for flush installations with minimal rear panel depth clearance.
Is there a matching reverse lamp in this series?
Yes the LED Autolamps 25W12 is the matching reverse lamp from the 25 Series (previously listed). Note the 25W12 is ADR approved but not ECE approved for the reverse function.
What is the return policy for this product?
Return eligibility is subject to the retailer's policy. Always confirm 12V compatibility and cutout dimensions before purchasing. Contact the seller if you're unsure.
