Rockford Fosgate P2-1X12 Punch Single P2 12" Loaded Enclosure

Rockford Fosgate P2-1X12 Punch Single P2 12" Vented Loaded Enclosure Genuine Punch Bass, Single Driver Simplicity

---

Product Overview

The Rockford Fosgate P2-1X12 is a single 12" vented loaded enclosure housing a genuine Punch P2 subwoofer, rated at 400 Watts RMS and internally pre-wired to a 1-ohm load. Designed for the most straightforward path to quality Punch P2 bass performance, it pairs with a compatible mono amplifier to deliver the impactful, high-output bass the vented P2 enclosure range is built for no enclosure building, no driver sourcing, and no tuning required.

Positioned as the single-driver counterpart to the dual 12" P2-2X12, the P2-1X12 suits Australian vehicles where a single high-output 12" vented enclosure provides the right balance of bass impact and boot space efficiency. The same genuine P2 woofer available separately in the Punch range is factory-loaded here in a computer-aided design tuned vented enclosure with a proprietary high-flow, low-noise port, 5/8" MDF construction, high-density carpet finish, and high-current compression binding posts ready to install straight out of the box.

---

Key Specifications

• Subwoofer: Single 12" Rockford Fosgate Punch P2
• Power handling: 400W RMS
• Pre-wired impedance: 1 ohm (internally wired)
• Enclosure type: Vented
• Construction: 5/8" MDF
• Finish: High-density carpet
• Port: Proprietary high-flow, low-noise
• Input terminals: High-current compression binding posts
• Enclosure design: Computer-aided design tuned
• Dimensions: Confirm with supplier
• Shipping weight: Confirm with supplier

---

Features & Benefits

• Single 12" Punch P2 driver: The same genuine Punch P2 woofer available as a standalone driver, factory-loaded and tuned in a single vented enclosure. Identical P2 tonal performance to a custom build without the time and cost of sourcing and assembling components separately.
• 400W RMS power handling: Pre-wired to 1 ohm for maximum power delivery from a compatible mono amplifier. More power capacity than a P1 single 12" setup, and a practical choice for Australian vehicles running a competent mid-range mono amplifier.
• Vented enclosure for high-output bass: The vented design produces higher output at the tuning frequency than a sealed enclosure, delivering the loud, impactful bass response preferred for single 12" high-output systems in larger vehicle boot spaces.
• Proprietary high-flow, low-noise port: Purpose-engineered for this specific enclosure to minimise air turbulence and port chuffing at high excursion levels. Maintains clean, articulate bass output at sustained high-volume use a clear quality advantage over budget vented enclosures.
• Computer-aided design tuning: Enclosure volume and port dimensions are calculated specifically for the P2 12" driver, ensuring the vented alignment is optimised for maximum output and accuracy at the intended tuning frequency.
• Pre-wired to 1 ohm: Factory internal wiring presents a 1-ohm load to the amplifier. No internal wiring configuration required connect your amplifier to the binding posts and go.
• More accessible than the P2-2X12: The P2-1X12 delivers single 12" P2 performance in a more compact and lighter footprint than the dual 12" P2-2X12 (35.08 kg, 86.0 cm wide) the right choice when dual 12" width or weight is impractical for the available boot space.
• Positioned above P1 in the Punch loaded range: The P2-1X12 delivers more power handling than a P1 single 12" loaded enclosure while sharing the same driver quality and enclosure construction standards across the Punch loaded range.
• 5/8" MDF construction: Rigid enclosure walls minimise panel flex, resonance, and vibration at sustained 400W RMS input essential for accurate, tight bass at the output levels this enclosure is designed to handle.
• High-density carpet finish: Durable, professional appearance suited to daily boot and cargo area use in Australian vehicles.
• High-current compression binding posts: Secure, reliable connections appropriate for the current demands of a 400W RMS, 1-ohm system.

---

Technical Specs

---

Compatible With

• Mono amplifiers stable at 1 ohm, rated at or near 400W RMS for optimal performance
• Rockford Fosgate Power and Punch series mono amplifiers
• Sedans, SUVs, wagons, and utes with boot or cargo area space available for a single 12" vented enclosure
• Vehicles where dual 12" P2-2X12 width or weight is impractical but single 12" P2 output is the target
• Rockford Fosgate wiring kits rated for high-current 1-ohm mono amplifier installation
• Rockford Fosgate RCA cables and signal accessories

---

Frequently Asked Questions

What amplifier does the P2-1X12 require? The P2-1X12 is pre-wired to 1 ohm and handles 400W RMS. A mono amplifier stable at 1 ohm and rated at or near 400W RMS is recommended such as a compatible Rockford Fosgate Power or Punch mono amplifier.

What is the difference between the P2-1X12 and P2-2X12? The P2-1X12 houses a single P2 12" driver rated at 400W RMS in a more compact single-driver enclosure, while the P2-2X12 houses dual P2D4-12 drivers rated at 800W RMS combined in a wider enclosure (86.0 cm, 35.08 kg). Choose the P2-1X12 when single 12" output is sufficient or the dual 12" footprint is too large for your boot space.

How does the P2-1X12 compare to the P1 single 12" loaded enclosure? The P2-1X12 uses a higher-pedigree Punch P2 driver with more power handling capacity than the P1 single 12" loaded enclosure, while sharing the same vented enclosure construction and computer-aided design tuning standards. Choose the P2-1X12 when more power handling and P2-level tonal performance is the priority.

Are the drivers in the P2-1X12 the same as the standalone P2 subwoofers? Yes. The P2-1X12 is loaded with a genuine Rockford Fosgate Punch P2 driver the same woofer available separately in the Punch P2 range factory-loaded and tuned in a computer-optimised vented enclosure.

Why choose a vented enclosure over a sealed enclosure for this application? A vented enclosure produces higher output at the tuning frequency than a sealed enclosure of equivalent driver and amplifier power, making it the preferred choice for maximum bass impact and volume. A sealed enclosure offers tighter, more accurate bass at lower output levels choose vented for impact, sealed for accuracy and control.